Home Business Insights Product Sourcing XFSFY-60A Halogen Moisture Meter Operating Instructions

XFSFY-60A Halogen Moisture Meter Operating Instructions

Views:50
Tags:
Halogen Moisture Meter
Moisture Analyzers

The XFSFY-60A Halogen moisture meter is a high-precision instrument for rapid moisture measurement. It features a high-precision sensor, halogen lamp heating source, and pre-stored sample moisture determination methods. With a maximum weighing value of 100g, it offers readability from 0.01% to 0.1% and a temperature setting range of 45-160. It is widely usedin industries like plastics, rubber, and food. Safety precautions include proper operation, stable environment, professional operation, and attention to hot parts and hazardous samples.

Overview of the XFSFY-60A Halogen moisture meter

The moisture meter is equipped with high-precision sensor and high-efficiency secondary heat radiation device on the basis of electronic balance to achieve rapid and accurate moisture measurement.

The moisture meter is based on the principle of thermal dynamics, and obtains moisture percentage content and other results from the mass of the substance after drying and the ratio of wet weight.

The moisture tester pre-stores a variety of different sample moisture determination methods, making the test work fast and simple. Double efficiency and accuracy of measurement results compared to mechanical products. It takes only a few minutes for the sample to be determined. The instrument is simple to operate, accurate to test, the display part of the value clearly visible, respectively, can display the moisture value, sample initial value, final value, measurement time, temperature and other data. And has the function of connecting with computer and printer. The moisture meter can be widely used in all industries that need to quickly measure moisture, to meet the application requirements of various industries, such as plastics, rubber, chemical, pharmaceutical, food, and other industries in the production and experiment process.

Technical Parameters

Model

XFSFYY

 

120A

120B

50A

60A

Maximum weighing value

100g

100g

100g

100g

Division

0.001g

0.002g

0.005g

0.01g

Readability

0.01%

0.02%

0.05%

0.1%

Heating source

Halogen lamp

Temperature setting

45-160

Weight calibration

100g

Scale Pan Size

φ100(mm)

Overall dimension

(D*W*H)330*205*165(mm)

Packaging dimension

(D*W*H)330*205*165(mm)

Net weight

3.2kg

Gross Weight

4.6kg

Safety Protection

For safe and reliable use of the moisture analyzer, please comply with the following conditions:

1. This instrument is suitable for the determination of sample moisture content. Any improper operation may result in personal injury or damage to the instrument.

2. Please connect to the AC power supply according to the instructions. The instrument uses a 3-pin grounding plug. Do not disconnect the grounding plug.

3. Power cable connection should not interfere with the normal activities of the human body. Avoid human touch or tripping.

4. Do not operate this instrument in dangerous, humid and unstable environments.

5. Remove the power when cleaning the moisture meter.

6. In use, it should be ensured that there is enough space around the instrument, and the upper space is at least 1m.

7. The instrument must be operated by professionals and wear appropriate protective equipment. Such as safety eyes, protective clothing, gloves and masks.

8. Please do not arbitrarily change the components and other aspects of the instrument. The maintenance of this instrument is carried out by the professional personnel authorized by the factory, and the moisture meter work is carried out by heating.

9. Do not place any flammable materials around the instrument.

10. The sample, heating halogen lamp and surrounding parts will be very hot during use, and extra care should be taken when moving the sample to prevent burns. Pay special attention to the hazards of some samples.

11. For some sample substances with potential safety hazards, please carefully do risk analysis and prevention work before testing. Fire/explosion: The heating of flammable and explosive samples containing solvents can produce flammable and explosive gases or vapors, so it should be carried out in a dry and low temperature environment to prevent fire or explosion.

Toxic/corrosive: Samples of toxic or corrosive components should be carried out in a well-ventilated environment, such substances will release toxic corrosive gases during heating, it is recommended to test samples as little as possible.

Note: The user shall be solely responsible for any damage caused by the testing of the above types of samples.

— Please rate this article —
  • Very Poor
  • Poor
  • Good
  • Very Good
  • Excellent
Recommended Products
Recommended Products